KillRamsey
Hall of Famer
- Location
- Hood River, OR
- Name
- Kyle
Man you are HOOKED
Last week I clocked in 75 miles. I'm trying to do 100 miles a week if possible. It's not as much as other cyclists, but I try and ride hard hills and make sure I'm at a high pace when on the flats. Also my diet has changed a bit, adding more carbs into the mix just to give me energy on the bike rides. My gym routine is also focused on lifting heavier now, with fewer reps, higher weights to maintain a a strong core and to keep the bulk down.Man you are HOOKED
Unlike Jonathan, my approach to cycling and pretty much everything else is a bit more sedate. I typically get about 20-30 miles a week on the bike, with a few brief sessions on the indoor bike added for good measure, although today I did a bit more than 24. My diet . . . eh, it could be better. My photography could best be described as "whatever happens, happens". But we're both enjoying life, so there's that. Here's my muse for the day:
View attachment 269397
LOL . . . same here.I probably drink way too much coffee!
Ahhhh, Salsa Journeyman, no? I like those. Jealous.
LOL . . . I will never again feel guilty about ordering a few bike parts.I finally put together my "gravel" spin on what a road bike should look like! It's sporting Shimano 105 5800 brifters, 105 5800 RD, FSA 50/34t crankset and an 11-32t 11 speed cassette. It has Ritchey flared gravel bars/seat post/saddle, WTB 29" thru-axle wheelset, Panaracer GravelKing plus TLC slicks, TRP HY/RD cable actuated hydraulic brakes and full CF frame and fork. Future upgrades will probably include a Shimano GRX rear derailleur, bigger rear cassette (11-36t 11 speed) and Shimano R7000 160mm crank arms/crankset with Ultegra press fit bottom bracket.
LOL . . . I will never again feel guilty about ordering a few bike parts.
Where do you find 165mm cranks? Everywhere I searched, they were crazy expensive. I run 175 on everything, basically because they are easier to find and pretty inexpensive, relatively.So basically this bike was old, slightly damaged/returned inventory, but came with the wheels, groupset, brakes, pedals, etc. The only issue was that the fork was beyond repair and I ordered a carbon fork from Ebay and it took about 2 weeks to arrive. It has the same rake of 50mm of the old fork and I had my LBS cut it to size and I installed it torquing it to spec. Even with the purchased fork, I still came in way under what it would cost to build this bike from scratch or buy a complete bike new.
It's still rough around the edges and needs some tuning. I'm running a flat mount fork with a post mount brake adapter, but the tolerances are off by a few millimeters so I'll have to file the adapter down a bit since it's causing the rotors to rub with no room for adjustment on the bolts. Fit seems pretty good and I was actually surprised on the frame. I'm able to run a 130mm stem without feeling stretched and I even slammed it last night. Since I'm in an odd 'tweener height, I usually go with smaller frame and run a long stem/high seat post. It's actually a few pounds lighter than my alloy bike, but to be honest I don't feel much difference just yet. Maybe because I have my alloy bike really dialed in. The Shimano 105 RD is okay, but I much prefer GRX for shifting. The front 105 derailleur is fine though and it's set and forget. The Ritchey saddle is actually pretty comfortable on my rear despite being quite rigid. It's curved in a way that actually creates a good fit. I snagged the flared Ritchey bar from my single speed, which I'll probably end up selling and stick to just having two similar, but slightly different purposed bikes (even my camera gear is like that)!
I actually did a bunch of research prior to putting this bike together and for how I ride, I think it'll be a nice road bike which will be better suited for speed. I definitely realize I do not like 170mm crank arms. My 165mm arms on my alloy GRX bike are awesome and I'm able to spin like crazy. I have 105 160mm cranks ready to install on this new carbon bike, so I'll go even shorter with this setup.
I'm about 5'7" and can fit anywhere between a 49-52cm bike frame. Shimano GRX's smallest is at 165mm and 105/Ultegra come in as short as 160mm. For my height, 160-165mm is actually the recommended length. I prefer the smaller crank arms because I get little-to-no toe clipping and since I live in a very hilly part of LA, the torque advantage of long crank arms don't really offer much advantage when every direction is a hill. On my group rides it's a noticeable difference because I can spin faster without getting out of the saddle, hence conserving my energy better. We've done some long hill climbing segments where the more dedicated roadies in the group will fall back due to burnout. GCN has a few good videos talking about crank arm length that really go into detail the advantages.Where do you find 165mm cranks? Everywhere I searched, they were crazy expensive. I run 175 on everything, basically because they are easier to find and pretty inexpensive, relatively.