Fuji How to Set Up a Fuji X-T20 to Use a 3rd Party Flash

[Dave Jenkins]

To use a 3rd party flash on a Fuji X-T20, go to the menu for "Flash Setting." Choose "Flash Function Setting" and press the right selector button on the back of the camera. This brings up a screen called "Sync Terminal." In the upper left is a box that says either "Off" or "M." If it's "Off," turn the Rear Command Dial to bring up "M." This will also open a small panel called "Sync" in the lower right of the screen. Navigate to it via the selector buttons, then use the Rear Command Dial to choose front or rear curtain sync. Press the "Back" button to exit.

 

[Bobby T]

This is how I have my Pro2 set up. Although I only use it for off camera flash.

Another thing to add to this is that the firing pin for flashes and triggers are the same on everything. If I am remembering correctly. I have used Canon and Nikon specific triggers and they all have fired the lighting. The lighting has to be set manually. Only fuji specific flashes and triggers will get you TTL.