Fuji X10 firmware updates

BBW

Administrator Emeritus
Jul 7, 2010
123
betwixt and between
BB
I just happened to be nosing around another forum - X100 Forum - and found out that there's been a second firmware update. Not sure if you all knew or not. Here's the link thanks to a member over on X100 who apparently has or will have the X10 soon.

You're now on to 1.02 Firmware for X10 | Fujifilm Global

1. Just in the following camera procedure, aperture value was incorrectly displayed as "F2.2" even if actual value was set to "F2.0". This phenomenon is improved.
(1) Mode dial is set to [A] or [M]
(2) Aperture is set to F2.0 (open aperture).
(3) Zoom lens position is moved from wide edge to telephoto edge, and finally to wide edge, again.
2. In the TRACKING mode, the AF hunting occurs, which you can see coming in focus and out of focus continuously in the LCD monitor. This occurs in the two cases below.
(1) Turn on the camera to select "TRACKING" in AF mode(shooting menu) and change to shooting mode by half-pressing the shutter button.
(If changing to shooting mode by pressing "DISP/BACK" button, this cannot occur.)
(2) Turn off and on the camera while "TRACKING" mode.
(If turning on and off after changing to EXR mode, this cannot occur.)
 

Latest posts

Latest threads

Top Bottom